High speed durability and high speed stability assessment

This track is oriented in studying tires built to withstand high speeds. The high-speed oval is designed to test vehicles at a high velocity of up to 250Km/h and it enables cars to drive straight or slalom at high speeds on 4-lane tracks. It spans the length of 4.6km and the banked road’s* impressive 38.87˚ inclination perfects the ultimate test.

Objective evaluation for control stability, lane change, slalom, and handling

This track is designed to test the handling stability and performance limits of tires. The skidpad is used to conduct extensive tests on handling safety and lane changes, enabling systematic and perfect tests.

Braking stability evaluation on the dry surface

As a dry surface circuit with a length of 3.38 km and 16 diverse corners, this circuit enables tests at a speed of up to 190km/h and semi-racing. Like VDA, it is the third-largest circuit compared to the global tire maker P/G. Course A and Course B are available for separate use, and this circuit allows various models to be tested specifically for the required performance.

Braking stability evaluation on a wet road surface Hydroplaning evaluation

This track is designed to research high-performance tires built to maintain grip on a wet road. The Wet Handling Circuit tests tires at a maximum speed of 128km/h. The Hydroplaning Curve allows us to adjust the water depth to observe the effect of the tire patterns and compounds on the curved wet road for each and every moment. It boasts the largest scale compared to global tire manufacturers.

Ride comfort, noise, and durability performance evaluation

Also referred to as Ride, it spans a total length of 970m and consists of 4 lanes and 15 special road surfaces. This is a test track where the crucial ride evaluation is carried out to obtain a smooth and quiet ride. ① Lane1: Ride comfort evaluation on the national highway (structured to have crack + pot hole + road surface pavement + manhole, etc.) ② Lane2: Ride comfort evaluation on the brick road and concrete road (depicts a brick road - motorway service station / cracked, irregular concrete - depicts a farm road/washboard - depicts the road surface with toll gate access where the speed needs to be reduced, etc.) ③ Lane3: Consists of obstacles (grants the objectivity in the ride comfort evaluation through the height difference of protrusions) ④ Lane4: Ride comfort evaluation on an asphalt road (rough 1, 2 - depicts the roads in Geumsan and Hyundai Kia Namyang R&D Center / Crack Asp. Irregular ash - depicts a non-flat road/crack - depicts a road lacking flatness and roughness in Geumsan)

Dry & wet braking evaluation / hydroplaning straight evaluation

This track is designed to test braking performance under a variety of extreme conditions, from dry to wet roads. Dry and wet roads make up 4 lanes each out of the 8 lanes in total, and the roads made of widely varying materials such as asphalt and concrete enable a complex set of tests.

Noise evaluation, ISO certification evaluation / objective noise evaluation

PBN: This track is a 920m-long certified road designed to test noise and conduct the ISO certification evaluation throughout. It has two road surfaces to handle more tests. The track consists of a 940M-long road designed for objective evaluation, 5 lanes, and 7 roads. (Cleat, Trench, Normal Asphalt, Gomori, Smooth Asphalt, Rough Asphalt, etc.) Since it has the same road surface structure as that of automobile manufacturers such as Toyota and Hyundai-Kia, it is ideal for OE tires.

Total tire performance evaluation for ride comfort, noise, pulling, etc. + a connected to each track

This is also known as the general road. This 0.5km-long road connects each track. In addition, it implements various environments found on many different types of roads, to conduct total tire performance evaluations for ride comfort, noise, pulling, and many more.

Off-road evaluation

Our tires surmount all obstacles without a hitch. The large-scale obstacle road contains unpaved roads and a wide variety of obstacles, enabling tests under the harshest environments. We are ready to travel a rugged path and our research aims to shape the future of off-road tires.

Chip-cut evaluation

This track spans a total length of 1.4km and is designed to verify the chip-cut and durability performance of various vehicles. It is an essential track for satisfying the requirements of OE car makers. It improves the chip-cut verification capability to minimize the chip-cut quality risk that may arise on general roads.

Office Control Tower

The control tower oversees Technoring, which was built to safely and efficiently manage Technoring's vast area (1,259,905㎡, equivalent to 125 soccer fields). The height point of the control tower is 37.1m, the height of a 12-floor apartment building (with a 3m floor-to-ceiling heights), and it will allow the visual monitoring of the test progress and immediate identification of the locations if an issue arises, along with 30 surveillance cameras installed on the proving grounds.